Description:
3.5” HVGA TFT-LCD screen display/480(RGB)*320 resolution/AHD coaxial test/PTZ control/Color bar generator/ 12V 1A power output.
The new AHD coaxial tester is developed for the On-Site installation and maintenance of coaxial camera, it also combine other functions analog camera test, analog signal output, port finder, UTP test, digital multimeter, optical power meter and TDR cable tester etc. Its portability, user-friendly design and many other functions make the tester an essential tool for all installers or technicians.
Applications:
1、CCTV system installation and maintenance
2、Network cabling project installation and maintenance
3、Dome camera AHD camera testing
4、Video transmission channel testing
5、PTZ controller
Features:
1) 3.5 inch screen display, 480（RGB）x320 resolution
2) Low power consumption, working time lasts 11 hours
3) LCD screen brightness/contrast/color saturation adjustable NTSC/PAL auto adjust
4)AHD coaxial camera image display, coaxial PTZ control and call up the camera OSD menu
5) Enhanced Color bar generator, PAL/NTSC multi-system color bar video generator (Eight-system switchable, transmit/receive eight-system colorful images).
6) LED Flashlight.
7) HD coaxial control, PTZ control, color bar generator shortcut key.
8) F1, F2 user-defined key
9) Visual fault locator, to test fiber’s bending and breakage * (Optional)
10) Digital Multi-meter, DC and AC voltage measurement, Resistance measurement Continuity test, Diode measurements, Capacitance measurement * (Optional)
11) Cable tracer, by sending the audio signal, enables the blue cable tracer tester to find the connected cable from messy cables. * (Optional)
12) Port Finder，it will enable the installer to easily and quickly find the connected port for an Ethernet cable.
13) TDR cable test, TDR break-point and short-circuit measurement. * (Optional)
14) PTZ control and PTZ protocol analysis
15) Cable test, Test LAN cable or telephone cable, UTP cable etc, cable type and the sequence of wires will be displayed
16) Support more than 30 protocols, such as Pelco-D, Pelco-P, SAMSUNG.
17) Support RS232/RS485,rate 600 ～115200bps adjustable
18) Built in Lithium Ion Polymer Battery（3.7V DC 3000mAh ）
19) Image display and data control integration
20) Handheld HD coaxial tester, easy to carry and operation.
21) Optical power meter, test fiber loss and value * (Optional)
Technical specifications:
|
Model
|
CT2800AHD【*】models are Optional
|
|
Video Test
|
|
Signal mode
|
NTSC/PAL (Auto adapt)
|
|
Display
|
3.5 inch digital TFT-LCD ,480（RGB）x 320 resolution
|
|
LCD adjustment
|
Brightness, Contrast, Saturation adjustable
|
|
Video IN/OUT
|
1 channel BNC Input & 1 channel Output
|
|
Video Output Mode
|
1.0 Vp-p
|
|
Video Level test
|
|
Level test
|
Video signals measured in IRE or mV (Only for Analog and HDSDI)
|
|
Video level meter (Optional)
|
|
Video Level meter
|
PEAK video signal level, SYNC signal level, COLOR BURST chroma level measurement
|
|
PTZ controller
|
|
Communication
|
Support RS232 and RS485
|
|
PTZ Protocol
|
Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc.
|
|
Baud Rate
|
600，1200，2400，4800，9600，19200,57600,115200bps
|
|
Video signal generation
|
|
Color bar generator
|
Output one channel PAL/NTSC color bar video signal for testing monitor or video cable.(red, green ,blue, white and black color )
|
|
UTP cable tester
|
|
UTP cable test
|
Test UTP cable connection status and display in the screen. Read the number of the test box.
|
|
DC12V 1A power output
|
|
DC12V power output
|
Output DC12V1A power for camera
|
|
Audio input test
|
|
Audio input test
|
test the pickup and other audio equipments on the front-end
|
|
RS485 data analysis
|
|
Data Monitor
|
Captures and analyzes the command data from controlling device
|
|
CVI test*
|
|
CVI video signal test
|
1 channel CVI in（BNC interface）support 720p 25/30/50/60fps,1080p 25/30fps,camera OSD menu control over coaxial cable
|
|
TVI test*
|
|
TVI video signal test
|
1 channel TVI in（BNC interface）support 720p 25/30/50/60fps,1080p 25/30fps,camera OSD menu control over coaxial cable
|
|
AHD test
|
|
AHD video signal test
|
1 channel AHD in (BNC interface）support AHD 2.0 version, 720p 25/30fps,1080p 25/30fps,camera OSD menu control over coaxial cable
|
|
HD SDI test*
|
|
HD SDI test
|
HD SDI Video display and test
|
|
Cable scan (Optional) *
|
|
Cable scan
|
Search the cable by the audio signal
|
|
Digital Multimeter (Optional) *
|
|
AC/DC Voltage
|
0-660V auto/manual range, the min resolution is 0.1mV
|
|
AC/DC current
|
660.0uA , 6.600mA, 66.00mA , 660.0mA, 10.00A
|
|
Resistance
|
660.0Ω, 6.600kΩ, 66.00kΩ, 660.0kΩ, 6.600MΩ, 66.00MΩ
|
|
Capacitance
|
6.6nf～66000uF， the min resolution is 1pf
|
|
Diode
|
0～2V forward voltage, the min resolution is 1mV
|
|
Data hold
|
Hold and display the measured value
|
|
Relative measurement
|
Display the relative power value
|
|
Continuity testing
|
Built-in buzzer will sound, if resistance is lower than 50 Ω
|
|
Testing speed
|
3 times/ seconds
|
|
Data range
|
-6600～+6600
|
|
Optical power meter (Optional) *
|
|
Calibrated Wavelength(nm)
|
850/1300/1310/1490/1550/1625nm
|
|
Power range(dBm)
|
-70～+10dBm
|
|
Sensitivity(nW)
|
0.001nW
|
|
Connector type
|
FC/PC
|
|
Data hold
|
Hold and display the measured value
|
|
Relative measurement
|
Display the relative power value
|
|
Visual fault locator (Optional) *
|
|
Visual fault locator
|
Test fiber’s bending and breakage ( SM and MM fiber)
|
|
TDR Tester (Optional) *
|
|
TDR Tester
|
breakpoint and short circuit measurement(BNC cable, telephone cable)
|
|
POWER
|
|
Power Adapter
|
DC 5V（1.5A）
|
|
Battery
|
Built-in 3.7V Lithium polymer battery ,3000mAh
|
|
Rechargeable
|
After charging 3-4 hour, working time lasts 11 hours
|
|
Low Consumption
|
Energy saving technology, the battery icon real-time display
|
|
Parameter
|
|
Operation setting
|
English/Chinese and other languages OSD menu
|
|
Auto off
|
5-60 (mins)
|
|
Keytone
|
On/Off
|
|
General
|
|
Working Temperature
|
-10℃ ～+50℃
|
|
Working Humidity
|
30%～ 90%
|
|
Dimension/Weight
|
194mm x 112mm x 48mm / 540g
|
