Model No.︰VB303T&RH(P)
Brand Name︰Chinasky/OEM
Country of Origin︰China
Unit Price︰CNY ¥ 1.1 / pc
Minimum Order︰100 pc
Passive UTP BNC RJ45 Video Camera Balun Price Cat5 Connector CCTV VB303T&RH(P)
Features:
The transmission distance has relation with the total power of the camera and other headend equipments, for the details, please refer to the following table:
Loading current (DC12V) |
Farthest transmission distance |
Remarks |
100mA or below |
1500m |
These data are the measured distances with standard Cat-5e twisted pair wire. The transmission distance will be directly affected if the used wires are in poor quality. |
200mA |
1200m |
|
300mA |
800m |
|
400mA |
600m |
|
500mA |
400m |
Technical specifications:
Single Channel Passive UTP BNC RJ45 Video Camera Balun Price Cat5 Connector CCTV VB303T&RH(P) |
||
Video Format |
NTSC, PAL , and SECAM |
|
Frequency Response |
DC to 8MHz |
|
Attenuation |
0.5dB typ |
|
CMRR |
60 dB |
|
Impedance |
Coax, Male BNC |
75 ohms |
RJ45/Terminal Block |
100 ohms |
|
Working environment |
Working Temperature |
-10℃ to +70℃ |
Storage Temperature |
-30℃ to +70℃ |
|
Humidity |
0 to 95% |
|
Wire Type |
UTP5 |
|
Connector |
Female BNC, RJ45 and Terminal Block |
|
Power |
36VDC |
|
Case |
Aluminum alloy case |
|
Dimension |
105mm*70mm*29mm |
Type of the required wire:
Unshielded Cat-5 or above twisted pair wire (Please use standard Cat-5 or above twisted pair wire. The wire quality will directly affect the transmitted image effect and transmission distance.)
Characteristic impedance: 100Ω±20Ω
DC loop resistance: 18Ω/100m
Differential capacitance: 62pf/m (Maximum)
Connection method:
Connect the two-color wires of a pair of Cat-5 unshielded twisted pair wire to the ‘+’ terminal of the green socket and connect the single-color wires to the ‘-’ terminal. Connect the BNC interface of the receiver to the monitor or other recording equipments. If there is any joint in the circuit, please adopt welding method or special junction box to ensure perfect contact at the joint. Please be sure to connect the interface marked with ‘’ symbol to the ground wire of the lighting-proof system with the copper conductor with sectional area≥1.5 mm2!
Adjusting method:
Adjust “BRIGHTNESS” knob to adjust the image brightness, then adjust “SHARPNESS” dial switch to compensate the image sharpness and color. The compensation size in turn is 1 as minimum and 4 as maximum. Pressing dial switch shows the compensation of this position is turned on. Next or multiple switches can be pressed according to the requirements. The four dial switches can compose 16 compensation values (as shown in the following figure) to meet the requirements of different transmission distances.
Frequently Asked Questions
Why does my video look like a scrambled Cable TV signal?
This typically indicates reversed polarity.
Can shielded twisted pair be used?
Some customers have successfully used shielded wire up to a few hundred feet. However we does not recommend it. Its high-frequency roll-off will severely degrade the distance performance.
Can Category 6 wire be used?
Yes. Unshielded Twisted Pair wire, Category 5 or better, can be used with UTP video transceiver.
Can I transmit more than one video signal in a multi-pair wire bundle?
Yes. One of the benefits of using UTP video transceivers is interference rejection. UTP video signals can reside in the same wire bundle as multiple video signals, ringing telephones, Ethernet, low voltage power, RS-422, RS-485, etc.
Single Channel Passive UTP BNC RJ45 Video Camera Balun Price Cat5 Connector CCTV VB303T&RH(P)